ARI® seminar: Safety valves
One-day seminar with the latest practical tips
Seminar objectives
In this one day seminar we will present our safety valves for district heating, steam and hot water applications. We will focus on valve selection, sizing and installation in user applications. During the seminar you have the opportunity to take a look behind the scenes and view our production.
Target audience
Whether you are an operator, planner, system manufacturer or distributor – all industry partners are warmly welcomed at ARI® seminars. Take the opportunity to meet your ARI® contact or swap notes with other market players.
Content
Part 1:
Safety valves acc. to EN ISO 4126-1
- Introduction
- Definition of a spring-loaded safety valve
- Execution and design
- Function acc. to EN ISO 4126-1, AD2000-A2, TRD and PED
- Standard safety valve product range
- Selection of safety valves
- Installation, inlet and outlet pipes
- Wrong behaviour of safety valves with installation examples
- Sizing program myValve: ISO 4126-1 / AD2000-A2:
Calculation of safety valves and pipe sizing - Discussion
Lunch including factory tour
Part 2:
Safety valves in district heating
- Selection criteria for safety valves
- Heat generation
- District heating network
- District heating transfer with direct and indirect connection
Safety valves for steam and hot water systems
- Steam, hot water and heating applications
- Selection criteria for safety valves
- Shell boilers and water tube boilers
- Installation, inlet and outlet pipes
- myValve calculation, installation and troubleshooting
- Discussion
Maintenance and repair
- Testing of safety valves for trouble-free operation
- Test frequency acc. to German rules
- Repair and overhaul
- Failure, wrong installation and possible causes
Cost
€ 65 + VAT incl. meals, seminar materials and certificate of attendance
Dates not convenient?
Please contact us to discuss alternative dates.
General seminar information
Cost
The seminar fee includes: Seminar materials as well as food and beverages during the event. The fee for our two day seminars also include an evening meal and overnight accommodation. Please contact us if you do not wish to stay overnight and your seminar fee will be reduced accordingly. Participants are responsible for their travel expenses to and from the event and these are not included in the seminar fees.
Cancellation
Cancellations in writing can be accepted up to 14 days before the seminar at no charge. A charge of 15 % of the seminar fee will be deducted if you cancel after this date. There is no refund for cancellations three days or less before the seminar is due to begin. You may, however, nominate a substitute to attend the same event in your place. If the minimum number of participants is not reached five days before a seminar begins, we reserve the right to cancel the seminar or propose an alternative date.
Certificate of attendance
All participants will receive a certificate of attendance listing the topics covered at the end of the seminar.
Venue
ARI® seminars are held at our headquarters in
Mergelheide 56 – 60, 33758 Schloß Holte-Stukenbrock, Germany.
Registration and contact
If you have any general questions or you wish to register for a seminar, please phone Petra Rautenberg on +49 (0) 5207-994 157 or send an email to petra.rautenberg@ari-armaturen.com.
Once your telephone or electronic registration has been confirmed by us, your booking is not subject to cancellation. Your invoice will be sent separately after the seminar. As the number of participants is limited, applications will be considered and confirmed in the order in which they have been received.
Book your seminar now!
Dates not convenient?
Please contact us to discuss alternative dates.